Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

A-GPS is not working on SIM7600 Board

Status
Not open for further replies.

JasonLiuEngr

Newbie level 2
Joined
Jul 22, 2019
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
16
Similar with this thread https://www.edaboard.com/showthread.php?375493-A-GPS-module-simcom-SIM5320E&p=1608421
Code:
AT+CGSOCKCONT=1,"IP","LTEMOBILE.APN"
OK
AT+CGPSURL="supl.google.com:7276"
OK
AT+CGPS=1,3 //On GPS- assisted
OK

+CGPS: 0    => GPS auto close after a second
/////////////////
AT+CGPS=1,3
OK
AT+CGPSINFOAT+CGPSINFO
+CGPSINFO:,,,,,,,,     =>Cannot get position because this is standalone gps

OK

+CGPS: 0   =>GPS auo close
///////////////////////////////

How should I make it work? Thank you!
 

What is this garbage you have posted? What is the context?

What is the error you are getting? What is your own thinking and analysis?
 

What is this garbage you have posted? What is the context?

What is the error you are getting? What is your own thinking and analysis?

Thank you for replying. As the title indicated, this is the AT command code for the Sim7600A-H GPS board.

The problem is I followed the instruction to use the A-GPS, but failed. The GPS didn't return the location instead, it just closed itself.

As there is no debug message, I know nothing about it. I saw a post here years ago so I wander if someone has sorted out. Not everything on the Earth is analysable, even the document/manual of this hardware doesn't specified what causes this.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top