+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Advanced Member level 1
    Points: 1,877, Level: 10

    Join Date
    Aug 2016
    Posts
    498
    Helped
    4 / 4
    Points
    1,877
    Level
    10

    parasitic coil capacitance from frequency

    Sweeping a coil with generator measured a coils voltage peaking at ~30.7Mhz and dipping at ~14Mhz - its inductance is ~4mH.

    Does this mean its parasitic capacitance is 6.71 fempto farads?
    Last edited by Zak28; 13th July 2019 at 02:15.

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 258,450, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    45,120
    Helped
    13717 / 13717
    Points
    258,450
    Level
    100

    Re: parasitic coil capacitance from frequency

    Can't be answered without knowing the complete measurement circuit.



    •   AltAdvertisement

        
       

  3. #3
    Advanced Member level 4
    Points: 7,327, Level: 20

    Join Date
    Dec 2015
    Location
    Madrid, Spain
    Posts
    1,275
    Helped
    314 / 314
    Points
    7,327
    Level
    20

    Re: parasitic coil capacitance from frequency

    Another way is to apply fast rising edge step voltage and measure the ringing.



    •   AltAdvertisement

        
       

  4. #4
    Super Moderator
    Points: 258,450, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    45,120
    Helped
    13717 / 13717
    Points
    258,450
    Level
    100

    Re: parasitic coil capacitance from frequency

    Parasitic coil capacitance refers to parallel capacitance, I presume. Thus you are looking for the parallel resonance of the unloaded coil. The best approach for unloaded resonance measurement is a weakly coupled grid dip meter or an equivalent setup.

    The fact that your measurement shows two resonances makes clear that your setup isn't a simple LC parallel circuit but some kind of LCC or LLC circuit. And most likely parasitic parameters of the measurement setup are falsifying the original resonance frequency.



--[[ ]]--