+ Post New Thread
Results 1 to 6 of 6

9th July 2019, 18:40 #1
 Join Date
 Jan 2018
 Posts
 164
 Helped
 1 / 1
 Points
 1,031
 Level
 7
what happens to RF choke while doing ac analysis
Hi, I know how to find dc analysis (to find gm) and ac analysis (to find gain) for a given circuit (Say CS stage) when resistive load (say R)is there, i.e. Resistor is connected between Vdd and drain terminal. From this I can arrive at the conclusion that voltage gain Av=gm*(rds//R).
But what happens if I have a RF choke conected between Vdd and drain terminal. While performing AC analysis inductor (RF choke) should become open circuit which leaves drain terminal to be open and then the calculated voltage gain Av=gm*rds. Is this correct or should we take the impedance of RF choke and include it also in the calculations?.
I also heard from a friend that there is something called RF anlysis also just like DC and AC analysis. I am wondering what that might be, anyone has any idea about it

Advertisement

9th July 2019, 19:15 #2
 Join Date
 Nov 2001
 Location
 Turkey
 Posts
 4,390
 Helped
 1323 / 1323
 Points
 30,037
 Level
 42
Re: what happens to RF choke while doing ac analysis
RF Choke will act as Open Circuit for AC Signals and Av=gm*rds will be as you have remarked ( Open Circuit Voltage Gain ). Another advantage of using RFC is that'll give you more Voltage Headroom for Vds ( no voltage drop on it ).These are however valid for ;
*Reactance of the RFC is sufficiently high for lowest AC frequency
*Self Resonance has never been taken into account ( it ought to be in practice )
AC Signal Analysis is general purpose and it is used very rarely in RF designs. But sparameters analysis and especially HB analysis are used essentially in RF Circuits.

Advertisement

9th July 2019, 20:17 #3
 Join Date
 Jan 2018
 Posts
 164
 Helped
 1 / 1
 Points
 1,031
 Level
 7
Re: what happens to RF choke while doing ac analysis
Could you explain more about this ? does this mean at the selfresonance frequency the RFC will have an internal resistor and I should take that into consideration?
   Updated   
Is there a recommanded procedure to perform Sparameter analysis and HB analysis, just like AC and DC analysis, to understand easily for beginners? Any good book or tutorial?

Advertisement

9th July 2019, 20:38 #4
 Join Date
 Nov 2001
 Location
 Turkey
 Posts
 4,390
 Helped
 1323 / 1323
 Points
 30,037
 Level
 42
Re: what happens to RF choke while doing ac analysis
Self Resonance Frequency is the functional limit of the RFC so that RFC cannot be used beyond SFR due to changing behavior of its nature.( beyond SFR, the RFC is not Inductor anymore, instead it's a dominantly capacitor )
For sparameters analysis and HB analysis, see the Help of the simulator which you will choose and search internet because there are lots of docs.

16th July 2019, 13:39 #5
 Join Date
 Dec 2004
 Location
 New England, USA
 Posts
 4,814
 Helped
 1347 / 1347
 Points
 34,278
 Level
 45
Re: what happens to RF choke while doing ac analysis
do you mean "RF CHOKE", which is an inductor that deliberately has high loss, and an "INDUCTOR", which deliberately has low loss (i.e. high Q)? Makes a big difference in the answer

Advertisement

16th July 2019, 18:41 #6
 Join Date
 Dec 2012
 Location
 New Delhi
 Posts
 1,209
 Helped
 182 / 182
 Points
 6,247
 Level
 18
Re: what happens to RF choke while doing ac analysis
I believe it means high impedance at high (relevant) frequencies. Whether by inductance or not.
Usually preferrable by inductance, since DC bias gets affected if it's due to resistance.
Having said that, I do not think an element designated as an RF choke needs to be designed with hiQ. That's more relevant for tuned circuits and such applications.
+ Post New Thread
Please login