+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Junior Member level 2
    Points: 1,684, Level: 9
    Achievements:
    7 years registered

    Join Date
    Jun 2011
    Posts
    23
    Helped
    0 / 0
    Points
    1,684
    Level
    9

    Design of Isolator in Ansys Electronics

    I want to design in practical a ring resonator on substrate like rogers rt duroid 5880. With those rings, I want to use some passive/active components as well in order to improve performance. This would be helpful if someone guide me how to do this in Ansys HFSS. I can design ring embedded on substrate in Ansys, but component like resistors, capacitors or inductors to add with that ring, I need suggestions. My isolator design will be almost similar like this picture.
    Click image for larger version. 

Name:	Image 1.JPG 
Views:	8 
Size:	79.8 KB 
ID:	154015

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 5
    Points: 30,904, Level: 42
    BigBoss's Avatar
    Join Date
    Nov 2001
    Location
    Turkey
    Posts
    4,538
    Helped
    1365 / 1365
    Points
    30,904
    Level
    42

    Re: Design of Isolator in Ansys Electronics

    You can of course use Ansys HFSS for that project but Ansys Design Environment is not very practical such designs.I recommend you to use Keysight ADS RF-Pro environment to simulated the planar structure and then with associated components.



    •   AltAdvertisement

        
       

  3. #3
    Junior Member level 2
    Points: 1,684, Level: 9
    Achievements:
    7 years registered

    Join Date
    Jun 2011
    Posts
    23
    Helped
    0 / 0
    Points
    1,684
    Level
    9

    Re: Design of Isolator in Ansys Electronics

    Thanks for your suggestion. As my total projects (Isolator is one part of the project) are connected via dynamic link feature of Ansys, therefore I need to have some guidance on Ansys. Besides, in my lab, we have the flexibility to use Ansys and Comsol only. No ADS or CST.



    •   AltAdvertisement

        
       

  4. #4
    Junior Member level 2
    Points: 1,684, Level: 9
    Achievements:
    7 years registered

    Join Date
    Jun 2011
    Posts
    23
    Helped
    0 / 0
    Points
    1,684
    Level
    9

    Re: Design of Isolator in Ansys Electronics

    Click image for larger version. 

Name:	Capture1.JPG 
Views:	3 
Size:	38.8 KB 
ID:	156806

    Can you please guide me to reproduce this in ADS software. This is another design. FET model is NE3210S01.



--[[ ]]--