+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Newbie level 1
    Points: 25, Level: 1

    Join Date
    Jun 2019
    Posts
    0
    Helped
    0 / 0
    Points
    25
    Level
    1

    Storing data from multiple accelerometers on an ELB-REV4?

    Hi guys I am using 3 accelerometers ADXL335 in our project. Each accelerometer outputs data on X, Y, Z pins of the ADXL335 I will be using an ELB-REV4. How can I distinguish the data from each accelerometer?

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 5
    Points: 24,286, Level: 37
    barry's Avatar
    Join Date
    Mar 2005
    Location
    California, USA
    Posts
    4,658
    Helped
    1032 / 1032
    Points
    24,286
    Level
    37

    Re: Storing data from multiple accelerometers on an ELB-REV4?

    Doesn’t each accelerometer connect to a different input?



    •   AltAdvertisement

        
       

  3. #3
    Super Moderator
    Points: 29,644, Level: 41
    andre_teprom's Avatar
    Join Date
    Nov 2006
    Location
    Brazil
    Posts
    8,863
    Helped
    1115 / 1115
    Points
    29,644
    Level
    41
    Blog Entries
    9

    Re: Storing data from multiple accelerometers on an ELB-REV4?

    By tagging the wires?
    Assigning different variable names?

    How can I distinguish the data from each accelerometer?
    What about elaborate the question ?
    --------------------------------------------------------------------------------------------------
    Part of the world that you live in, You are the part that you're giving ( Renaissance )



    •   AltAdvertisement

        
       

  4. #4
    Advanced Member level 5
    Points: 24,286, Level: 37
    barry's Avatar
    Join Date
    Mar 2005
    Location
    California, USA
    Posts
    4,658
    Helped
    1032 / 1032
    Points
    24,286
    Level
    37

    Re: Storing data from multiple accelerometers on an ELB-REV4?

    Use different colors? Give them cute little names like “Beppo” and “Fluffy”?

    Please, at least put as much effort into forming your question as the people on this board put into the answers. For starters, not everybody knows what an ELB-REV4 is. I just ASSUMED it’s some sort of Arduino or SBC...



  5. #5
    Newbie level 1
    Points: 28, Level: 1

    Join Date
    May 2019
    Posts
    0
    Helped
    0 / 0
    Points
    28
    Level
    1

    Re: Storing data from multiple accelerometers on an ELB-REV4?

    You need assign suitable name for each accelerometer for example accelerometer1 pins 41, 51, 54 accelerometer2 pins 55, 56, 57 and the accelerometer3 pins 66, 67, 7 hence it is the coding that you can differentiate between 3 accelerometers by assigning suitable name for each accelerometer. any time you read value from pin 41 this means you are reading accelerometer1 X value and for pin 51 you are reading accelerometer1 Y value.

    Regards

    Sandy Jones



--[[ ]]--