Nhera
Member level 1
I want to have a diode connected NMOS in a 3D CST simulation. I just want a wire loop and in this wire loop, there is a port and this lumped transistor model.
I simply want to have this in a full 3D simulation.
It would look like this (maybe), except, instead of a diode, there would be a transistor model.
I would like to be able to change the transistor model, but I can just start with a random model such as
.model AO6407 VDMOS(pchan Rg=3 Rd=14m Rs=10m Vto=-.8 Kp=32 Cgdmax=.5n Cgdmin=.07n Cgs=.9n Cjo=.26n Is=26p Rb=17m ksubthres=.1 mfg=Alpha_&_Omega Vds=-20 Ron=34m Qg=13n)
How would I go about putting this transistor in diode connected configuration in the simulation?
View attachment transistor_model.zip
I simply want to have this in a full 3D simulation.
It would look like this (maybe), except, instead of a diode, there would be a transistor model.
I would like to be able to change the transistor model, but I can just start with a random model such as
.model AO6407 VDMOS(pchan Rg=3 Rd=14m Rs=10m Vto=-.8 Kp=32 Cgdmax=.5n Cgdmin=.07n Cgs=.9n Cjo=.26n Is=26p Rb=17m ksubthres=.1 mfg=Alpha_&_Omega Vds=-20 Ron=34m Qg=13n)
How would I go about putting this transistor in diode connected configuration in the simulation?
View attachment transistor_model.zip