Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Selection of Zeros of S11(s)

Status
Not open for further replies.

pancho_hideboo

Advanced Member level 5
Joined
Oct 21, 2006
Messages
2,847
Helped
767
Reputation
1,536
Reaction score
732
Trophy points
1,393
Location
Real Homeless
Activity points
17,490
We can determine S11(s) from S21(s).

S11(s)*S11(-s) = 1 - S21(s)*S21(-s)
Zin(s) = {1 + S11(s)} / {1 - S11(s)} or
Zin(s) = {1 - S11(s)} / {1 + S11(s)}

Here two options exist for S11(s).
(1) Choose Zeros <= 0.0
(2) Choose Zeros >= 0.0

Usually I choose (1), since (1) is Minimum Phase System.
However both are surely feasible.

Actually, if I realize Zin(s) by T-Toplogy LC Ladder circuit, (1) and (2) are simply reverse each other.

Code:
# Zeros <= 0.0
L1 = 2.25822
C2 = 1.11103
L3 = 0.804011
C4 = 0.507241
L5 = 0.174319
R5 = 1

# Zeros >= 0.0
L1 = 0.174319
C2 = 0.507241
L3 = 0.804011
C4 = 1.11103
L5 = 2.25822
R5 = 1

How can I interpret selection of zeros of S11 ?
 

Attachments

  • 2019-0620-1218-51.png
    2019-0620-1218-51.png
    12.4 KB · Views: 145
  • 2019-0620-1218-45.png
    2019-0620-1218-45.png
    13.2 KB · Views: 142
  • 2019-0620-1219-29.png
    2019-0620-1219-29.png
    12.1 KB · Views: 143
  • 2019-0620-1219-25.png
    2019-0620-1219-25.png
    13 KB · Views: 130
  • 2019-0620-1214-52.png
    2019-0620-1214-52.png
    13.5 KB · Views: 144
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top