+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Full Member level 6
    Points: 3,245, Level: 13
    Achievements:
    7 years registered

    Join Date
    Sep 2010
    Location
    India,Bangalore
    Posts
    341
    Helped
    15 / 15
    Points
    3,245
    Level
    13

    Display segment issue

    Hi all,

    We are facing an issue in our display segment. Issue is after placing the display inside the enclosure (with PCB), some of the segments are not working in some boards.

    Note: Before placing inside the enclosure, displays are fine and working.

    Attached an image of similar display.
    Click image for larger version. 

Name:	CAREUD-U906WF-Tire-Pressure-Monitoring-System-External-Sensors--407205-.jpg 
Views:	6 
Size:	15.4 KB 
ID:	153840

    Our process is,
    1. Component assembly (machine) without display and backlight.
    2. Manual soldering Backlight and then Display.
    3. Loading firmware.
    4. Enclosure assembly.

    Anyone have any idea what could be the issue?

    Thanks in advance.
    ...VIPU (Very Important Person in Universe) ...lol

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 79,964, Level: 68
    Achievements:
    7 years registered
    Awards:
    2nd Helpful Member
    betwixt's Avatar
    Join Date
    Jul 2009
    Location
    Aberdyfi, West Wales, UK
    Posts
    13,093
    Helped
    4377 / 4377
    Points
    79,964
    Level
    68

    Re: Display segment issue

    If it has a backlight I'm assuming it is an LCD. The most likely reason is the assembly process is slightly distorting the display relative to the PCB so they are no longer exactly parallel to each other. If you are using a zebra strip connector (the usual method) a gap may have appeared on one side or the other of the strip causing signal loss to parts of the display.

    Brian.
    PLEASE - no friends requests or private emails, I simply don't have time to reply to them all.
    It's better to share your questions and answers on Edaboard so we can all benefit from each others experiences.



    •   AltAdvertisement

        
       

  3. #3
    Super Moderator
    Points: 75,662, Level: 67
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    15,340
    Helped
    3491 / 3491
    Points
    75,662
    Level
    67

    Re: Display segment issue

    Hi,

    Or ESD problem during soldering or assembling...

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



--[[ ]]--