+ Post New Thread
Results 1 to 8 of 8

17th June 2019, 14:23 #1
 Join Date
 Dec 2016
 Posts
 18
 Helped
 0 / 0
 Points
 574
 Level
 5
measuring the parasitic capacitance at a certain node in cadence
is it possible to measure the parasitic capacitance at a certain node in a schematic in cadence??

Advertisement

17th June 2019, 16:37 #2
 Join Date
 Jun 2013
 Location
 Norway
 Posts
 743
 Helped
 311 / 311
 Points
 5,649
 Level
 17
Re: measuring the parasitic capacitance at a certain node in cadence
Yes, it is.

Advertisement

17th June 2019, 17:51 #3
 Join Date
 Oct 2006
 Location
 Real Homeless
 Posts
 2,496
 Helped
 664 / 664
 Points
 16,320
 Level
 30
Re: measuring the parasitic capacitance at a certain node in cadence
I don't know what you want to mean by "in a schematic in cadence" at all.
However Synopsys HSPICE have following.
Code:.OPTION CAPTAB Adds up all the capacitances attached to a node and prints a table of singleplate node capacitances. Syntax .OPTION CAPTAB Default 0 Description Use this option to print a compiled table of singleplate node capacitances for diodes, BJTs, MOSFETs, JFETs, and passive capacitors at each operating point. Note: When .OPTION CAPTAB is used to estimate the equivalent capacitance of the circuit nodes, HSPICE can give a zero capacitance values for some nodes when a resistance is connected to that node. The reason for getting 0 is that the capacitance is a dynamic, frequencydependent capacitance and not a static capacitance. You need to run an AC analysis to see a nonzero node capacitance.
https://www.edaboard.com/showthread.php?380999Last edited by pancho_hideboo; 17th June 2019 at 18:01.

Advertisement

17th June 2019, 18:37 #4
 Join Date
 Dec 2016
 Posts
 18
 Helped
 0 / 0
 Points
 574
 Level
 5
Re: measuring the parasitic capacitance at a certain node in cadence
can you please tell me how to find the parasitic capacitance in cadence IC 6.1.3
   Updated   
i have connected a circuit in cadence and i want to know the value of the parasitic capacitance at this node
my question is wither there is an analysis that could give me the value of the parasitic capacitance at this node?

17th June 2019, 18:53 #5
 Join Date
 Mar 2008
 Location
 USA
 Posts
 6,357
 Helped
 1852 / 1852
 Points
 39,312
 Level
 48
Re: measuring the parasitic capacitance at a certain node in cadence
If you include adding minor schematic mods, then I prefer
to add a shunt pulsed current source, who can inject a
known small charge (large enough to be seen, small enough
to be smallsignalish) and look at the node step voltage
right at the end of the pulse. Q=CV.
Any "on" elements will steal from step voltage and you may
want to apply a little work at determining what went to R
and what went to C.

17th June 2019, 19:03 #6
 Join Date
 Oct 2006
 Location
 Real Homeless
 Posts
 2,496
 Helped
 664 / 664
 Points
 16,320
 Level
 30
Re: measuring the parasitic capacitance at a certain node in cadence
What do you want to mean ?
Describe correctly with correct terminology.
If you use Cadence Spectre, use "info what=captab" analysis in Cadence Spectre.
Surely see https://www.edaboard.com/showthread.php?380999
1 members found this post helpful.

Advertisement

17th June 2019, 20:11 #7
 Join Date
 Jun 2013
 Location
 Norway
 Posts
 743
 Helped
 311 / 311
 Points
 5,649
 Level
 17
Re: measuring the parasitic capacitance at a certain node in cadence
What would you like to do?
1. Simulate capacitance at specific node?
2. Extract capacitance for all nodes?
3. Read parasitic capacitance from extracted view?
What views you have?
What tools you have?

17th June 2019, 20:47 #8
 Join Date
 Apr 2016
 Posts
 1,771
 Helped
 312 / 312
 Points
 8,433
 Level
 21
Re: measuring the parasitic capacitance at a certain node in cadence
Mandatory reminder that Cadence is a company. There is no tool called Cadence...
Really, I am not Sam.
+ Post New Thread
Please login