+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Newbie level 3
    Points: 36, Level: 1

    Join Date
    May 2019
    Posts
    3
    Helped
    0 / 0
    Points
    36
    Level
    1

    CPW based superconducting resonator using CST

    I simulated some superconducting Resonator by CST. but I can't find any resonating in S21 by time domain solver, but when I used frequency domain solver, It resonated, but not in the right frequency. what is problem? I checked all the parameter I know, boundary condition, background material, accuracy etc.

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 5
    Points: 13,722, Level: 28

    Join Date
    Apr 2014
    Posts
    2,141
    Helped
    859 / 859
    Points
    13,722
    Level
    28

    Re: CPW based superconducting resonator using CST

    If you think about the simulation method, high Q resonance and time domain solver is not a good combination.

    The users that I know use Sonnet for accurate calculation of their superconducting resonators, and use CST only for visualization (field plots) of the superconducting resonators.


    1 members found this post helpful.

    •   AltAdvertisement

        
       

  3. #3
    Newbie level 3
    Points: 36, Level: 1

    Join Date
    May 2019
    Posts
    3
    Helped
    0 / 0
    Points
    36
    Level
    1

    Re: CPW based superconducting resonator using CST

    Thank you for your answer, I am trying to make some combination of CPW and Metamaterials structures, Sonnet seems to not good for metamaterials, and CST suit has enough solver to handle this situation, the problem is I just can not find a right good resonate in S21.



    •   AltAdvertisement

        
       

  4. #4
    Advanced Member level 5
    Points: 13,722, Level: 28

    Join Date
    Apr 2014
    Posts
    2,141
    Helped
    859 / 859
    Points
    13,722
    Level
    28

    Re: CPW based superconducting resonator using CST

    Quote Originally Posted by Shawn-zxb View Post
    and CST suit has enough solver to handle this situation, the problem is I just can not find a right good resonate in S21.
    Good luck then. It's all about dense meshing and numerical precision.



  5. #5
    Newbie level 2
    Points: 1,491, Level: 8
    Achievements:
    7 years registered

    Join Date
    May 2011
    Location
    Melbourne Australia
    Posts
    2
    Helped
    0 / 0
    Points
    1,491
    Level
    8

    Re: CPW based superconducting resonator using CST

    I would first use the Eigenmode solver for the resonator alone without any coupling structure & ports. Once the desired resonance is established, you can proceed to a driven mode f-domain simulation.



--[[ ]]--