Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Regarding .lis file generation in HSPICE.

Status
Not open for further replies.

Amit_1

Newbie level 4
Joined
Aug 23, 2016
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
46
Hi

When I simulate the .sp file using HSPICE, I get .ic0, .st0, and .tr0 files as a result after the simulation.
May I know, why I am not getting the .lis file in addition to the above other mentioned files?

Thanks
Amit
 

You have to specify output logfile as option of hspice command.

% hspice aho.sp -o boke.lis
 
  • Like
Reactions: Amit_1

    Amit_1

    Points: 2
    Helpful Answer Positive Rating
Thanks a lot for your kind reply, it worked...

I also found that another command, "hspice <filename>.sp > <filename>.lis" can also be used to generate .lis file.

Just an additional thing, I would like to know that in the lis file details, the "Total CPU time" is shown as 0.00s (probably it is in ms). May I know, how can I look for the Total CPU time, if it is say is in "ms"?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top