peace1
Newbie level 2
I need to simulate a patch antenna for SAR Analysis using phantom models available in Ansys Electonics (HFSS 19).
From a tutorial video, i noticed that the whole phantom and antenna are required to be placed inside the radiation box. I used lump port to excite patch, placed it above phantom at 5mm distance and tried to simulate but its giving error. (too many conductors crossing lump port)
the patch antenna shows successful simulation results without phantom.
From a tutorial video, i noticed that the whole phantom and antenna are required to be placed inside the radiation box. I used lump port to excite patch, placed it above phantom at 5mm distance and tried to simulate but its giving error. (too many conductors crossing lump port)
the patch antenna shows successful simulation results without phantom.