+ Post New Thread
Results 1 to 7 of 7

14th May 2019, 02:19 #1
 Join Date
 Jul 2006
 Location
 USA
 Posts
 412
 Helped
 8 / 8
 Points
 4,408
 Level
 15
A zero at folded cascode apmlifier
Why there is a zero by counting the gain from the input to node2. Why the gain at high frequency is gm1/gm2? Thanks.
page 10.
http://ece.tamu.edu/~spalermo/ecen47...ascode_ota.pdf

Advertisement

15th May 2019, 18:13 #2
 Join Date
 Nov 2001
 Location
 US
 Posts
 935
 Helped
 341 / 341
 Points
 10,657
 Level
 24
Re: A zero at folded cascode apmlifier
Because looking into the source of at low enough frequencies you see big resistance and gain is defined by ro1ro5. When CL reduces the impedance at the output, then looking into n2 you start seeing 1/gm2 and you get the behavior shown on the plots.
1 members found this post helpful.

15th May 2019, 20:53 #3
 Join Date
 Nov 2001
 Location
 US
 Posts
 935
 Helped
 341 / 341
 Points
 10,657
 Level
 24

Advertisement

16th May 2019, 05:09 #4
 Join Date
 Jul 2006
 Location
 USA
 Posts
 412
 Helped
 8 / 8
 Points
 4,408
 Level
 15
Re: A zero at folded cascode apmlifier
That's really helpful. Could you please explanate the zero? Why there is a zero and why the zero location is that? Thank you.

16th May 2019, 21:11 #5
 Join Date
 Nov 2001
 Location
 US
 Posts
 935
 Helped
 341 / 341
 Points
 10,657
 Level
 24

Advertisement

17th May 2019, 15:11 #6
 Join Date
 Jul 2006
 Location
 USA
 Posts
 412
 Helped
 8 / 8
 Points
 4,408
 Level
 15
Re: A zero at folded cascode apmlifier
Wz is a zero location.
I didn't know what the zero location calculation can also use the gainbandwidth constant relationship to obtain. Thanks.

17th May 2019, 18:10 #7
 Join Date
 Nov 2001
 Location
 US
 Posts
 935
 Helped
 341 / 341
 Points
 10,657
 Level
 24
Re: A zero at folded cascode apmlifier
The gain bandwidth relation just relates two frequencies on a + or  20db/dec response. It doesn't care if you call one frequency a zero or a pole or just pick two frequencies on the slope.
1 members found this post helpful.
+ Post New Thread
Please login