Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Uploaded file showing 0 bytes

Status
Not open for further replies.
M

mayasunny

Member level 3
Joined
Mar 21, 2019
Messages
56
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
481
hiee members,
i'm working on a project that, transferring files to web server using sim800 module, i'm able to transfer the file to web (drivehq) using sim800 module but the problem it is showing empty files, if I upload the file using FileZilla client it showing data in the file, I followed these commands

AT+FTPPUTNAME="abc.x"
AT+FTPPUTPATH="/"
AT+FTPPUT=1 to start uploading

if I type AT+FTPPUT=2,10 and give some data eg 12345; it showing the 12345 in the abc.x, otherwise it showing empty file.

I have tried with activating passive mode AT+FTPMODE=1, but no luck
 
Last edited by a moderator:

Your problem definition is not clear. According to you the file gets created and does have the transmitted data. The zero size is probably because the data size is too small. Try sending much more data and see what happens.
 

could be the reason, you are doing something wrong while sending data.
its successful to create the file but data was not transferred correctly so file stays empty, or if data is too small then open the file and see if its there.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top