Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Grids error in Eagle PCB

Status
Not open for further replies.

venkates2218

Full Member level 6
Joined
Sep 30, 2016
Messages
354
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
4,306
eagle.jpg

In schematic SIZE=2.540 MM,MULTIPLE=1,ALT=0.3175
In Board SIZE=1.27MM,MULTIPLE=1,ALT=0.158

If I changed the SIZE=1.271MM in board means the above error is showing in the schematic.

how to solve this error..?
 

1.27 mm is 0.050 inches, or 50 mils.
i believe eagle "thinks" in inches, not meters

1.271 mm is 0.050039 inches, or 50.0039 mils
it is a computer. it has a threshold check for "coarse" layout grid.

you can remove this warning (yellow triangle is a warning, not an error)
by going back to 1.27 mm, or you can ignore it.

on a different note, why would you make such a tiny change?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top