+ Post New Thread
Results 1 to 7 of 7
  1. #1
    Newbie level 1
    Points: 16, Level: 1

    Join Date
    Apr 2019
    Posts
    1
    Helped
    0 / 0
    Points
    16
    Level
    1

    uc3842 current limmiting without current sense

    hello;iwant to design a buck converter using uc3845 controller;and i want to limit the peak current without current sensing...can any one help me and introduce a config to me?

    •   AltAdvertisment

        
       

  2. #2
    Super Moderator
    Points: 73,677, Level: 66
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    14,947
    Helped
    3403 / 3403
    Points
    73,677
    Level
    66

    Re: uc3842 current limmiting without current sense

    Hi

    difficult. It's like you want to keep the speed limit without knowing your actual speed.

    What's your idea behind this requirement?

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



    •   AltAdvertisment

        
       

  3. #3
    Full Member level 6
    Points: 2,134, Level: 10

    Join Date
    Aug 2016
    Posts
    363
    Helped
    55 / 55
    Points
    2,134
    Level
    10

    Re: uc3842 current limmiting without current sense

    Quote Originally Posted by omid2006 View Post
    hello;iwant to design a buck converter using uc3845 controller;and i want to limit the peak current without current sensing...can any one help me and introduce a config to me?
    Why do you not want current sensing? Without current sense, you cannot tell the PWM to switch in realtime and you do not want that.
    -------------
    --Akanimo.



    •   AltAdvertisment

        
       

  4. #4
    Advanced Member level 3
    Points: 6,893, Level: 19
    Achievements:
    7 years registered

    Join Date
    Jul 2010
    Location
    Sweden
    Posts
    898
    Helped
    357 / 357
    Points
    6,893
    Level
    19

    Re: uc3842 current limmiting without current sense

    Do you mean current sensing on the output (short circuit protection), or do you mean current sensing in the switch element on the primary side?

    The whole point with uc3842 is to sense the current in the switch element on the primary side, so it is meaningless to use the uc3842 without it.

    If you mean current limiting for short circuit protection, you don't need an extra current sense for that.



  5. #5
    Advanced Member level 5
    Points: 14,436, Level: 28
    schmitt trigger's Avatar
    Join Date
    Apr 2013
    Posts
    2,404
    Helped
    780 / 780
    Points
    14,436
    Level
    28

    Re: uc3842 current limmiting without current sense

    The question tells me that the OP has not bothered to read the datasheet.

    The UC384x-series, by its own datasheet description, are Current-mode PWM controllers.

    Without the current feedback, the controller will not have the necessary waveform information to properly control the PWM cycle.
    My batteries are recharged by "Helpful Post" ratings.
    If you feel that I've helped you, please indicate it as a Helpful Post



    •   AltAdvertisment

        
       

  6. #6
    Advanced Member level 5
    Points: 31,774, Level: 43
    Achievements:
    7 years registered

    Join Date
    Sep 2008
    Location
    cambridge
    Posts
    6,633
    Helped
    483 / 483
    Points
    31,774
    Level
    43

    Re: uc3842 current limmiting without current sense

    I suspect that the OP wants to do a buck with a hi-side fet and yet doesn’t want the hassle of hi-side current sense……..but I would say, possibly use a current sense transformer to do your current sense.

    Ive actually seen solar bucks with no current sense…….they charge batteries….and as long as the battery voltage is high enough, you can actually do it without current sense, as long as you obviously limit the duty cycle…….the problem happens.. if the output suddenly goes short circuit and then of course your buck inductor current staircases up into saturation and bang goes the fet……unless of course, your microcontroller was able to sense the output short circuit quick enough and turn off the fet pronto.
    But yes, if using the ucc384x then you would have to drive its oscillator with a micro because otherwise it needs the current sense ramp to know when to turn off the fet.

    - - - Updated - - -

    here is a nice uc384x buck, to show how it works..in ltspice



  7. #7
    Advanced Member level 4
    Points: 8,215, Level: 21

    Join Date
    Aug 2015
    Posts
    1,298
    Helped
    488 / 488
    Points
    8,215
    Level
    21

    Re: uc3842 current limmiting without current sense

    To sense current without sensing current you need a Xlax hybrid flux capacitor model # 37 56779980 21 from Newark, this part has globular crystal technology that predicts the current so that the turn off time can be pre-programmed - hope this helps ...



--[[ ]]--