Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how i use this evaluation board "DC2222A-A" without PDA ?

Status
Not open for further replies.
S

siavosh1

Newbie level 2
Joined
Apr 16, 2019
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
27
Hi everybody
Until now , I design my ADC circuits with myself but i have new project that i need to use 32bit SAR ADC and i want send data from this ADC to the Atmega32 (8bit). as you know designing the PCB or drive circuit for this ADC`s is difficult and need time for finding errors and challenge with noise and ... So i make a decision that use the evaluation board but i haven`t any experience in it.
the LTC2500-32 is good for me and have a good features. and i found the DC2222A-A is the evaluation board of LTC2500-32 .but in datasheet i found this eval board make for some PDA .
I want use DC2222A-A stand alone without PDA . Can i do that or is it wisely ?!
thank you for sharing your experience or advice with me.

https://www.analog.com/media/en/dsp-documentation/evaluation-kit-manuals/dc2222afa.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/250032fb.pdf
 

Hi,

I searched through both documents and did not find "PDA".
What are you talking about?

Klaus
 

i talk about DC2026 , DC590 or DC890 . the boards that "DC2222A-A" can connect to them for reading or collecting data .
 

Hi,

I still don't know what you mean with "PDA"?
Please explain.

DCxxx are demo boards. You may use them, because they have reliable specifications, but if you don't want to use them, then you may use your own hardware. But don't be surprised if the results are worse than expected.

So i make a decision that use the evaluation board but i haven`t any experience in it.
Click to expand...
Honestly, I don't understand this statement at all. In my eyes it contradicts itself.
* Demo boards are used for designers without this special experience
* If a designer has the experience, he will not need the demo boards.

Klaus
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top