+ Post New Thread
Results 1 to 7 of 7
  1. #1
    Full Member level 5
    Points: 2,504, Level: 11

    Join Date
    Jul 2012
    Posts
    264
    Helped
    20 / 20
    Points
    2,504
    Level
    11

    Narrowband filter on 50Hz?

    On line, we have 230V 50Hz and sometimes control frequency 180Hz, the controll signal is 100 weaker.
    I need to evaluate the presence of the control frequency. I use MCU and Goertzel algorithm, its work, but sometimes there is a problem and it would be convenient to suppress 50Hz with an analog filter .

    I designed a filter that suppresses 50Hz against 180Hz by -60dB.
    That's the theory. SMD ceramic capacitor have manufacturing tolerance and temperature and time changes.
    I don't need -60db just me i -30dB.
    The question is whether such a thing will work in reality and will be usable in the long term?



    Click image for larger version. 

Name:	hd.png 
Views:	4 
Size:	23.4 KB 
ID:	152380

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 79,829, Level: 68
    Achievements:
    7 years registered
    Awards:
    2nd Helpful Member
    betwixt's Avatar
    Join Date
    Jul 2009
    Location
    Aberdyfi, West Wales, UK
    Posts
    13,066
    Helped
    4372 / 4372
    Points
    79,829
    Level
    68

    Re: Narrowband filter on 50Hz?

    I have never had problems with notch filters like that. There may be minor degradation of performance over many years but it should still block to below your 30dB threshold. Assuming this is to remove AC power line signal, don't forget that there may be slight variation on frequency anyway so you don't want the notch to be too narrow or it will fail to work.

    Brian.
    PLEASE - no friends requests or private emails, I simply don't have time to reply to them all.
    It's better to share your questions and answers on Edaboard so we can all benefit from each others experiences.



    •   AltAdvertisement

        
       

  3. #3
    Super Moderator
    Points: 75,514, Level: 67
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    15,307
    Helped
    3486 / 3486
    Points
    75,514
    Level
    67

    Re: Narrowband filter on 50Hz?

    Hi,

    What about using an ADC and a microcontroller.
    The filter setting is accurate and stable.
    No need for trimming
    Simple hardware.

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



    •   AltAdvertisement

        
       

  4. #4
    Super Moderator
    Points: 79,829, Level: 68
    Achievements:
    7 years registered
    Awards:
    2nd Helpful Member
    betwixt's Avatar
    Join Date
    Jul 2009
    Location
    Aberdyfi, West Wales, UK
    Posts
    13,066
    Helped
    4372 / 4372
    Points
    79,829
    Level
    68

    Re: Narrowband filter on 50Hz?

    A simple HPF might work better.

    The values in the twin-tee ( post #1 ) do not look right though. The single capacitor should be about twice the value of the series ones and the series resistors should be twice the value of the single one.

    Using 51K + 51K + 100nF and 47nF + 47nF + 25.3K may work better. 25.3K = 22K and 3.3K in series.

    Placing the network in a feedback loop will sharpen the response.

    Brian
    PLEASE - no friends requests or private emails, I simply don't have time to reply to them all.
    It's better to share your questions and answers on Edaboard so we can all benefit from each others experiences.



  5. #5
    Advanced Member level 5
    Points: 53,307, Level: 56
    Achievements:
    7 years registered

    Join Date
    Jan 2008
    Location
    Toronto area of Canada
    Posts
    8,684
    Helped
    2035 / 2035
    Points
    53,307
    Level
    56

    Re: Narrowband filter on 50Hz?

    The powerline is not always a perfect sinewave. Frequently its peaks are squashed causing harmonics like 100Hz and 150Hz on a 50Hz powerline.



    •   AltAdvertisement

        
       

  6. #6
    Advanced Member level 5
    Points: 14,574, Level: 29
    schmitt trigger's Avatar
    Join Date
    Apr 2013
    Posts
    2,424
    Helped
    787 / 787
    Points
    14,574
    Level
    29

    Re: Narrowband filter on 50Hz?

    What Audioguru said.
    Powerlines have significant harmonics, so perhaps it is best that you use a bandpass filter to recover your frequency of interest.
    My batteries are recharged by "Helpful Post" ratings.
    If you feel that I've helped you, please indicate it as a Helpful Post



  7. #7
    Advanced Member level 5
    Points: 53,307, Level: 56
    Achievements:
    7 years registered

    Join Date
    Jan 2008
    Location
    Toronto area of Canada
    Posts
    8,684
    Helped
    2035 / 2035
    Points
    53,307
    Level
    56

    Re: Narrowband filter on 50Hz?

    Why are you notching 50Hz instead of only allowing the 180Hz?
    A fluorescent light (it actually blinks) will produce plenty of 150Hz on the power line. So even if you have a very sharp highpass filter that allows 180Hz but attenuates 150Hz a little then your circuit will fail whenever a fluorescent light is turned on.



--[[ ]]--