Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Adding/Importing PCB enclosure(step/iges file) to HFSS 3D layout

Status
Not open for further replies.

aparnab20

Newbie level 1
Joined
Aug 14, 2018
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
14
I've designed a microstrip-based power divider. I have the 3d cad drawings(step & IGES)for PCB enclosure.
I want to simulate and analyze the S-parameters of Power divider with enclousre using HFSS. There are two options in HFSS. 1. HFSS 2. HFSS 3D layout. I have used both but none of them helped me with my simulation.

In HFSS, I was able to import the 3d PCB Layout file (.step) as well as enclosure but unable to add thin film resistors or any resistor.
How to add a resistor or impedance boundary at the resistor location?

In HFSS 3D layout mode, I was able to add resistors but unable to import PCB enclosure.

Please suggest me how to analyze power divider with adding resistor models and PCB enclosure.
I'm attaching an image of PCB for your reference (green ones are resistors).
 

Attachments

  • pd.jpg
    pd.jpg
    27.2 KB · Views: 160

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top