Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Iip3 of mixer using qpss and qpac

Status
Not open for further replies.
V

Varmantechy

Newbie level 1
Joined
Apr 3, 2019
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
9
I'm working on passive mixer of single balanced which has two LOs of 180 degrees out of phase.
But the I would like to perform iip3 simulation using cadence spectre. The problem is the mixer out put tones having all the harmonics. i.e fin+/-n*flo1+/-n*flo2.where as I'm only required fin and flo1 iip3..
Please note that flo1=flo2, expect they are 180degree out of phase..
Please help me
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top