+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Newbie level 1
    Points: 152, Level: 2

    Join Date
    Jun 2018
    Posts
    1
    Helped
    0 / 0
    Points
    152
    Level
    2

    didn't find inverter for specified operating conditions

    Hi Forum,
    I ran a synthesis using design compiler for a using standard cell library which has operating conditions(Voltage=1.05V, Temp=25C). Now I want to run synthesis for different operating conditions (voltage=1.05V, temp=25C). I used DC command set_operating_conditions to set the operating conditions which I want and ran the synthesis. I am getting an error "The target library doesn't contain an inverter. An inverter is required."

    •   AltAdvertisment

        
       

  2. #2
    Member level 5
    Points: 1,319, Level: 8

    Join Date
    Feb 2014
    Posts
    93
    Helped
    1 / 1
    Points
    1,319
    Level
    8

    Re: didn't find inverter for specified operating conditions

    Quote Originally Posted by vyella1 View Post
    Hi Forum,
    I ran a synthesis using design compiler for a using standard cell library which has operating conditions(Voltage=1.05V, Temp=25C). Now I want to run synthesis for different operating conditions (voltage=1.05V, temp=25C). I used DC command set_operating_conditions to set the operating conditions which I want and ran the synthesis. I am getting an error "The target library doesn't contain an inverter. An inverter is required."
    Maybe you dont have the libraries for the op condition you want?



--[[ ]]--