+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Junior Member level 1
    Points: 273, Level: 3

    Join Date
    Mar 2018
    Posts
    19
    Helped
    0 / 0
    Points
    273
    Level
    3

    Reading Datasheet for TMG39931 I2C module

    Hi, I have been using TMG39931 and trying to detect the gesture of an object from one direction.


    While going through the datasheet I was not able to understand mentioned below table parameters

    Register/Bit Address Description
    ENABLE 0x80<0> Power ON
    ENABLE 0x80<2> ALS Enable
    ENABLE 0x80<4> ALS Interrupt Enable
    ENABLE 0x80<3> Wait Enable

    In this table Enable is only reading the data or Writing the data?
    Any suggestion on this will be a great help.

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 74,732, Level: 66
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    15,158
    Helped
    3448 / 3448
    Points
    74,732
    Level
    66

    Re: Reading Datasheet for TMG39931 I2C module

    Hi,

    My recommendation: Download datasheets always from the manufacturer internet site.

    --> They are the most actual datasheets
    --> There you will find additional informations, documents, links..

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



    •   AltAdvertisement

        
       

  3. #3
    Super Moderator
    Points: 256,166, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    44,672
    Helped
    13589 / 13589
    Points
    256,166
    Level
    100

    Re: Reading Datasheet for TMG39931 I2C module

    It's all in the datasheet. Figure 44: Control Register Map tells which registers are R/W or read only.



--[[ ]]--