chamarnadh
Member level 1
- Joined
- Nov 13, 2008
- Messages
- 36
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,288
- Location
- HYDERABAD,INDIA
- Activity points
- 1,544
Hi,
We are using the Kintex 7 family and device XC7K410T-FFG900 in one of our design.
While performing the signal integrity for the SERDES signals and while assigning the IBIS model in Hyperlynx, we are getting the following error. Please find the attached snap shot.
And the pins in the IBIS model and in our schematic symbol are not matching.
Could any one help on this?
Thanks and Regards
Amarnadh
We are using the Kintex 7 family and device XC7K410T-FFG900 in one of our design.
While performing the signal integrity for the SERDES signals and while assigning the IBIS model in Hyperlynx, we are getting the following error. Please find the attached snap shot.
And the pins in the IBIS model and in our schematic symbol are not matching.
Could any one help on this?
Thanks and Regards
Amarnadh