+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Junior Member level 1
    Points: 612, Level: 5
    Anomis's Avatar
    Join Date
    Mar 2017
    Location
    South Korea
    Posts
    16
    Helped
    4 / 4
    Points
    612
    Level
    5

    3phase bldc hall sensor problem

    Hello my friends,
    I am trying to drive a 350 watt,3phase, BLDC motor (DGW07-20j model) with stm32 micro controller. But I have problem with hall sensors because their outputs are not similar to the hall sensors which I have seen on the internet.
    I connected the sensor supply to +5v dc (according to the sensor pcb guide). Then I connected two of hall sensor outputs (2of3) to the oscilloscope channels which is shown in the following picture.
    Unfortunately, I couldn't find the model number of hall sensor or related data-sheet. But I connected the supply and outputs based on printed pinout guide on pcb. You can see these connections in this picture...
    The motor was working while I captured the hall sensor outputs but clearly not not in a good way because the switching phase timing should be adjusted using hall sensor outputs.
    Click image for larger version. 

Name:	photo5938057484226899319.jpg 
Views:	2 
Size:	318.0 KB 
ID:	150870
    Click image for larger version. 

Name:	photo5938057484226899320.jpg 
Views:	2 
Size:	175.8 KB 
ID:	150871Click image for larger version. 

Name:	photo5938057484226899318.jpg 
Views:	2 
Size:	327.5 KB 
ID:	150872

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 80,392, Level: 69
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    16,308
    Helped
    3700 / 3700
    Points
    80,392
    Level
    69

    Re: 3phase bldc hall sensor problem

    Hi,

    I wonder myself how we can help you.
    Without part name / datasheet, without circuit, without test conditions ...
    A scope picture without informations...

    it's almost impossible to give good assistance.

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



    •   AltAdvertisement

        
       

  3. #3
    Super Moderator
    Points: 53,567, Level: 56

    Join Date
    Apr 2011
    Location
    Minneapolis, Minnesota, USA
    Posts
    13,068
    Helped
    2606 / 2606
    Points
    53,567
    Level
    56

    Re: 3phase bldc hall sensor problem

    Quote Originally Posted by Anomis View Post
    have problem with hall sensors because their outputs are not similar to the hall sensors which I have seen on the internet.
    There are hall sensors and there are hall switches. Can you confirm which type you have?



--[[ ]]--