+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Advanced Member level 1
    Points: 2,148, Level: 10
    baileychic's Avatar
    Join Date
    Aug 2017
    Posts
    414
    Helped
    42 / 42
    Points
    2,148
    Level
    10

    How to assign config word in Proteus ?

    How to assign config word in Proteus ?

    For PIC16F88 there are 2 Config words shown in mikroC PRO PIC Compiler but Proteus PIC16F88 model has only 1 field for Config word. How to enter config word for PIC16F88 in Proteus ?

    See image.

    •   AltAdvertisment

        
       

  2. #2
    Junior Member level 2
    Points: 390, Level: 4
    ArakelTheDragon's Avatar
    Join Date
    Jul 2017
    Location
    If you like the post, please press "Like".
    Posts
    21
    Helped
    2 / 2
    Points
    390
    Level
    4

    Re: How to assign config word in Proteus ?

    You don't need to enter this configuration word. It should be done by Proteus or the compiler you are using. If you have 2 configuration words, that may mean that you have 2 options, but you can set only 1. What settings do each of the configuration words set? Check the datasheet for how many configuration words can be used at 1 time.
    You can try by adding 2 bytes "0xByte1 0xByte2".
    If you liked the post, please press "Like".



--[[ ]]--