+ Post New Thread
Results 1 to 14 of 14
  1. #1
    Member level 1
    Points: 668, Level: 5

    Join Date
    Feb 2017
    Posts
    40
    Helped
    0 / 0
    Points
    668
    Level
    5

    How create negative voltage -700mV - -1000mV 30mA?

    I need create negative voltage -700 - -1000mV max current 30mA (typical 5mA) from positive +5 or +3,3V and and all that best in simple and small.
    I thing switching capacitor , but small SMD IC have fixed output for example -3,3 or mirrored to the input voltage and I need -700mV ,

    Any idea?

  2. #2
    Super Moderator
    Points: 77,851, Level: 68
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    15,776
    Helped
    3592 / 3592
    Points
    77,851
    Level
    68

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Hi,

    What about a SC voltage inverter plus a negative voltage regulator?
    Maybe there are even combined ICs.

    Did you use selection tools provided by the manufacturers?

    Klaus
    Please donīt contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



    •   AltAdvertisement

        
       

  3. #3
    Full Member level 6
    Points: 3,609, Level: 14

    Join Date
    Sep 2013
    Posts
    396
    Helped
    162 / 162
    Points
    3,609
    Level
    14

    Re: How create negative voltage -700mV - -1000mV 30mA?

    You can use restive divider for voltage splinting + & - voltage for small current application Click image for larger version. 

Name:	Split voltage.png 
Views:	4 
Size:	4.8 KB 
ID:	150708



  4. #4
    Member level 1
    Points: 668, Level: 5

    Join Date
    Feb 2017
    Posts
    40
    Helped
    0 / 0
    Points
    668
    Level
    5

    Re: How create negative voltage -700mV - -1000mV 30mA?

    My application not simple and dot low power , I need only small negative for tree CMOS op amp and GND must be GND.

    > What about a SC voltage inverter plus a negative voltage regulator?
    honestly, I do not even know the integrated negative regulator for one volt or less



  5. #5
    Super Moderator
    Points: 77,851, Level: 68
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    15,776
    Helped
    3592 / 3592
    Points
    77,851
    Level
    68

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Hi,

    honestly, I do not even know the integrated negative regulator for one volt or less
    Neither do I.
    Thus one of us or you should use the selection tools provided by the manufacturers.
    Did you use selection tools provided by the manufacturers?
    I recommend you do this on your own.

    Klaus
    Please donīt contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



  6. #6
    Super Moderator
    Points: 52,942, Level: 56

    Join Date
    Apr 2011
    Location
    Minneapolis, Minnesota, USA
    Posts
    12,949
    Helped
    2580 / 2580
    Points
    52,942
    Level
    56

    Re: How create negative voltage -700mV - -1000mV 30mA?

    This is a simple negative polarity charge pump circuit. You may find you can use a 555 IC for the role of both clock and half-bridge. Or perhaps it won't work from a 3.3v supply... then you'll probably need to construct an astable multivibrator.

    Click image for larger version. 

Name:	neg polarity charge pump -800mV 30mA driven from half-bridge clk 4v.png 
Views:	12 
Size:	33.9 KB 
ID:	150715

    - - - Updated - - -

    The output is negative, referenced to 0v ground.



    •   AltAdvertisement

        
       

  7. #7
    Advanced Member level 5
    Points: 14,971, Level: 29
    schmitt trigger's Avatar
    Join Date
    Apr 2013
    Posts
    2,488
    Helped
    805 / 805
    Points
    14,971
    Level
    29

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Use the classic 7660 IC (has been around for decades) in voltage inverting mode, and clamp the output with a series combination of a small signal diode plus a schottky. A 1N4148 and a 1N5711 should work.
    My batteries are recharged by "Helpful Post" ratings.
    If you feel that I've helped you, please indicate it as a Helpful Post



  8. #8
    Newbie level 6
    Points: 229, Level: 2

    Join Date
    Oct 2018
    Posts
    11
    Helped
    0 / 0
    Points
    229
    Level
    2

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Jadeit
    v_out of ICL7660 depend on capacitors
    so v_out not staple



  9. #9
    Super Moderator
    Points: 77,851, Level: 68
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    15,776
    Helped
    3592 / 3592
    Points
    77,851
    Level
    68

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Hi,

    v_out of ICL7660 depend on capacitors
    This sounds as if one could control the output voltage by modifying the capacitor value.
    Where in the ICL7660 did you read this statement?

    Klaus
    Please donīt contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



  10. #10
    Advanced Member level 5
    Points: 14,971, Level: 29
    schmitt trigger's Avatar
    Join Date
    Apr 2013
    Posts
    2,488
    Helped
    805 / 805
    Points
    14,971
    Level
    29

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Quote Originally Posted by wondrous View Post
    Jadeit
    v_out of ICL7660 depend on capacitors
    so v_out not staple
    That would be the purpose of the output clamping diodes.

    Also where did you read that voltage changes with capacitance on a 7660?
    My batteries are recharged by "Helpful Post" ratings.
    If you feel that I've helped you, please indicate it as a Helpful Post



  11. #11
    Super Moderator
    Points: 260,253, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    45,447
    Helped
    13829 / 13829
    Points
    260,253
    Level
    100

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Regulated SC voltage inverters are available with -1.2V Vref, e.g. lm27761. You may introduce an intentional offset to the feedback path to get lower output voltage.

    Another option, an unregulated SC inverter in combination with one of the very few negative voltage regulators exposing less than -1.2 Vref, e.g. ADP7183.



  12. #12
    Newbie level 6
    Points: 229, Level: 2

    Join Date
    Oct 2018
    Posts
    11
    Helped
    0 / 0
    Points
    229
    Level
    2

    Re: How create negative voltage -700mV - -1000mV 30mA?




    •   AltAdvertisement

        
       

  13. #13
    Super Moderator
    Points: 77,851, Level: 68
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    15,776
    Helped
    3592 / 3592
    Points
    77,851
    Level
    68

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Hi,

    So output voltage depends on a lot of parameters...

    The whole thing is a voltage inverter with series resistance.


    Klaus
    Please donīt contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



  14. #14
    Newbie level 6
    Points: 229, Level: 2

    Join Date
    Oct 2018
    Posts
    11
    Helped
    0 / 0
    Points
    229
    Level
    2

    Re: How create negative voltage -700mV - -1000mV 30mA?

    Hi
    @ KlausST : yes sir it's
    @ Jadeit : I wish you all the best and success



--[[ ]]--