Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

XC9536XL programing by DLC9G

Status
Not open for further replies.

frdm90

Member level 1
Joined
Jul 21, 2017
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
255
I know there are a lot of same problems on the internet, but there are different solutions, every time when i do this what i read on xilinx forum or other site does not work :(
I am trying to program a XC9536XL with DLC9G platform cable and i have an error in iMPACT:

PROGRESS_START - Starting Operation.
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1': Device IDCODE : 01011001011000000010000010010011
INFO:iMPACT:1579 - '1': Expected IDCODE: 00001001011000000010000010010011
'1': Check to make sure if version '0101' is supported.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.

Maybe somebody has similar problem? I have add pullup resistor to TDO, check all voltages....
 

Since you have checked the voltages I'll ask the most obvious question - are you calling out the right part / using the correct bsdl file? The part where it asks if version 0101 is supported could be an out of date bsdl file vs. the programming software. Try downloading the latest bsdl file from Xilinx.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top