+ Post New Thread
Results 1 to 7 of 7

7th January 2019, 08:45 #1
 Join Date
 Jun 2018
 Posts
 10
 Helped
 0 / 0
 Points
 189
 Level
 2
Core losses in the inductor
Hello everyone
We use steinmetz equation to find the corelosses. I have four coils from different suppliers and I want to know core losses in each coil. Problem is that there is no information in the data sheet about the core materials and no flux density, frequency and power graphs are given as the suppliers do not want to share this information and keeps this as secret secret. Without this information I cannot use steinmetz equation. The dimensions of the inductor, inductor and temperature rise vs current graphs are given.
How can I find the corelosses in this situation, Is there any other alternative way?
Regards
Ghufran

Advertisement

7th January 2019, 09:58 #2
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 44,932
 Helped
 13664 / 13664
 Points
 257,472
 Level
 100
Re: Core losses in the inductor
Generally, you need to measure the losses versus frequency and flux empirically. That's also what manufacturers do. Steinmetzt equation isn't but a simplified estimation of actual behavior.

Advertisement

12th January 2019, 18:56 #3
 Join Date
 Sep 2008
 Location
 cambridge
 Posts
 6,707
 Helped
 487 / 487
 Points
 32,177
 Level
 43
Re: Core losses in the inductor
I presume you mean ferrite inductors....some maunfacturers like vishay, coilcraft, Wuerth, give software to allow you to calculate core loss in whichever inductor.
But otherwise, you just have to make do with thermal measurements with thermocouples glued to the ferrite.

Advertisement

13th January 2019, 05:03 #4
 Join Date
 Mar 2008
 Location
 USA
 Posts
 6,329
 Helped
 1843 / 1843
 Points
 39,152
 Level
 48

21st January 2019, 08:09 #5
 Join Date
 Aug 2015
 Posts
 1,543
 Helped
 558 / 558
 Points
 9,508
 Level
 23
Re: Core losses in the inductor
really you are interested in the overall losses  make a buck ckt at the design frequency and with the design current, with a fixed Vin and load  then put in the differing chokes  one at a time  and measure the Trise with time  this will show the lossiest snd the least lossy ...

Advertisement

22nd January 2019, 03:56 #6
 Join Date
 Nov 2012
 Posts
 3,014
 Helped
 730 / 730
 Points
 16,453
 Level
 31
Re: Core losses in the inductor
forgive my ignorance, but in the Physics class, we did draw the BH curve and we had a box connected to a CRO that can display the hysteresis graph. It should not be difficult to set up a similar experiment.

22nd January 2019, 08:37 #7
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 44,932
 Helped
 13664 / 13664
 Points
 257,472
 Level
 100
Re: Core losses in the inductor
we had a box
+ Post New Thread
Please login