+ Post New Thread
Results 1 to 7 of 7

7th January 2019, 08:45 #1
 Join Date
 Jun 2018
 Posts
 10
 Helped
 0 / 0
 Points
 189
 Level
 2
Core losses in the inductor
Hello everyone
We use steinmetz equation to find the corelosses. I have four coils from different suppliers and I want to know core losses in each coil. Problem is that there is no information in the data sheet about the core materials and no flux density, frequency and power graphs are given as the suppliers do not want to share this information and keeps this as secret secret. Without this information I cannot use steinmetz equation. The dimensions of the inductor, inductor and temperature rise vs current graphs are given.
How can I find the corelosses in this situation, Is there any other alternative way?
Regards
Ghufran

Advertisement

7th January 2019, 09:58 #2
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 44,752
 Helped
 13612 / 13612
 Points
 256,485
 Level
 100
Re: Core losses in the inductor
Generally, you need to measure the losses versus frequency and flux empirically. That's also what manufacturers do. Steinmetzt equation isn't but a simplified estimation of actual behavior.

Advertisement

12th January 2019, 18:56 #3
 Join Date
 Sep 2008
 Location
 cambridge
 Posts
 6,684
 Helped
 485 / 485
 Points
 32,037
 Level
 43
Re: Core losses in the inductor
I presume you mean ferrite inductors....some maunfacturers like vishay, coilcraft, Wuerth, give software to allow you to calculate core loss in whichever inductor.
But otherwise, you just have to make do with thermal measurements with thermocouples glued to the ferrite.

Advertisement

13th January 2019, 05:03 #4
 Join Date
 Mar 2008
 Location
 USA
 Posts
 6,306
 Helped
 1837 / 1837
 Points
 39,001
 Level
 48

21st January 2019, 08:09 #5
 Join Date
 Aug 2015
 Posts
 1,473
 Helped
 544 / 544
 Points
 9,158
 Level
 22
Re: Core losses in the inductor
really you are interested in the overall losses  make a buck ckt at the design frequency and with the design current, with a fixed Vin and load  then put in the differing chokes  one at a time  and measure the Trise with time  this will show the lossiest snd the least lossy ...

Advertisement

22nd January 2019, 03:56 #6
 Join Date
 Nov 2012
 Posts
 2,995
 Helped
 727 / 727
 Points
 16,357
 Level
 30
Re: Core losses in the inductor
forgive my ignorance, but in the Physics class, we did draw the BH curve and we had a box connected to a CRO that can display the hysteresis graph. It should not be difficult to set up a similar experiment.

22nd January 2019, 08:37 #7
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 44,752
 Helped
 13612 / 13612
 Points
 256,485
 Level
 100
Re: Core losses in the inductor
we had a box
+ Post New Thread
Please login