+ Post New Thread
Results 1 to 12 of 12
  1. #1
    Full Member level 6
    Points: 3,904, Level: 14

    Join Date
    Jul 2006
    Location
    USA
    Posts
    344
    Helped
    6 / 6
    Points
    3,904
    Level
    14

    S11 is larger than 0dB

    If an antenna is terminated at 50 ohms, then the S11 is less than 0DB.


    If an antenna is terminated at a complex impedeance (50-500*i) ohm and the termination is passive as well , is it possible that the S11 is greater than 0dB for certain frequency range? Thanks.
    Last edited by shanmei; 4th January 2019 at 21:30.

    •   AltAdvertisment

        
       

  2. #2
    Super Moderator
    Points: 250,728, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    43,651
    Helped
    13276 / 13276
    Points
    250,728
    Level
    100

    Re: S11 is larger than 0dB

    No. Negative s11 dB number (|s11| > 1) corresponds to negative resistance, not possible for passive circuits.


    1 members found this post helpful.

  3. #3
    Full Member level 6
    Points: 3,904, Level: 14

    Join Date
    Jul 2006
    Location
    USA
    Posts
    344
    Helped
    6 / 6
    Points
    3,904
    Level
    14

    Re: S11 is larger than 0dB

    I think I have not renormalized the impedance.

    Usually, the port impedance is 50 ohms, so we do not have to choose the renormalize option.

    If the port impedance is not 50 ohms, then we should choose the normalize option otherwise the complex port might have positive S11.

    I really appreciate your rely.

    Click image for larger version. 

Name:	Capture.PNG 
Views:	6 
Size:	12.8 KB 
ID:	150645



  4. #4
    Super Moderator
    Points: 250,728, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    43,651
    Helped
    13276 / 13276
    Points
    250,728
    Level
    100

    Re: S11 is larger than 0dB

    No. S11 of passive circuits always stays inside the unit circle (|S11| <= 1, S11db <= 0), for any real reference impedance Z0.


    1 members found this post helpful.

    •   AltAdvertisment

        
       

  5. #5
    Full Member level 6
    Points: 3,904, Level: 14

    Join Date
    Jul 2006
    Location
    USA
    Posts
    344
    Helped
    6 / 6
    Points
    3,904
    Level
    14

    Re: S11 is larger than 0dB

    For real reference impedance port , for example Z0=50 ohm, S11dB <0.

    For complex impedeance port, for example, Z0=50+500j ohms, S11dB migth > 0 . right?

    The complex impedance should not be normalized toi 50 ohm.



    •   AltAdvertisment

        
       

  6. #6
    Advanced Member level 5
    Points: 28,207, Level: 40
    BigBoss's Avatar
    Join Date
    Nov 2001
    Location
    Turkey
    Posts
    4,069
    Helped
    1231 / 1231
    Points
    28,207
    Level
    40

    Re: S11 is larger than 0dB

    Quote Originally Posted by shanmei View Post
    For real reference impedance port , for example Z0=50 ohm, S11dB <0.

    For complex impedeance port, for example, Z0=50+500j ohms, S11dB migth > 0 . right?

    The complex impedance should not be normalized toi 50 ohm.
    We discussed this phenomena in this forum few times.
    Your fault is to fix the Characteristic Impedance being as 50 Ohm.Essentially your Characteristic Impedance is not 50 anymore and S11 cannot be calculated as usual.
    Instead it should be calculated as

    S11=(ZL-Conj(ZS))/(ZL+ZS)



  7. #7
    Super Moderator
    Points: 250,728, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    43,651
    Helped
    13276 / 13276
    Points
    250,728
    Level
    100

    Re: S11 is larger than 0dB

    For complex impedeance port, for example, Z0=50+500j ohms, S11dB migth > 0 . right?
    I didn't calculate, I guess yes. But I don't a see reasonable physical meaning of complex reference impedance. Please enlighten me if you can.


    1 members found this post helpful.

  8. #8
    Advanced Member level 5
    Points: 28,207, Level: 40
    BigBoss's Avatar
    Join Date
    Nov 2001
    Location
    Turkey
    Posts
    4,069
    Helped
    1231 / 1231
    Points
    28,207
    Level
    40

    Re: S11 is larger than 0dB

    Quote Originally Posted by FvM View Post
    But I don't a see reasonable physical meaning of complex reference impedance. Please enlighten me if you can.
    Let me answer you..
    In fact there is no complex Characteristic Impedance in real world except some very lossy mediums ( what Textbook says..)
    In additional to, some few textbooks cover this phenomena and it's not very detailed explained and been passed as is..


    1 members found this post helpful.

  9. #9
    Full Member level 6
    Points: 3,904, Level: 14

    Join Date
    Jul 2006
    Location
    USA
    Posts
    344
    Helped
    6 / 6
    Points
    3,904
    Level
    14

    Re: S11 is larger than 0dB

    For example, the matching between the RFID chip and the RFID antenna.

    The output impedance of the RFID chip is 50-500j, then the antenna input impedance should be 50+500j for conjugated matching.

    Now I am designing the antenna with the port impedance set to 50+500j in HFSS.

    The RFID chip always has an imaginary impedance part.



  10. #10
    Member level 3
    Points: 369, Level: 4

    Join Date
    Aug 2018
    Posts
    56
    Helped
    13 / 13
    Points
    369
    Level
    4

    Re: S11 is larger than 0dB

    Reflection always comes together with characteristic impedance of a transmission line. In your case, the load impedance is 50+j500, source impedance is 50-j500. While they are connected together without any delay. In this situation, reflection doesn't make any mean anymore. Reflected signal must travel in the opposite transmission direction of the signal, you have no way to distinguish the direction of signal since the delay is zero.

    While if you put a transmission line between the source and load, there exists delay and it makes the reflection meaningful.


    1 members found this post helpful.

    •   AltAdvertisment

        
       

  11. #11
    Full Member level 1
    Points: 612, Level: 5

    Join Date
    Jun 2018
    Posts
    104
    Helped
    10 / 10
    Points
    612
    Level
    5

    Re: S11 is larger than 0dB

    Quote Originally Posted by shanmei View Post
    The output impedance of the RFID chip is 50-500j, then the antenna input impedance should be 50+500j for conjugated matching.
    Now I am designing the antenna with the port impedance set to 50+500j in HFSS.

    In your design, include the feed of antenna; and the cable in between as well. It's never a perfect match between chip and antenna; you need to add delay components and lossy parts to make matching work. As others have stated before, reflection makes sense when there are space to reflect.

    You can check the concept of using lossy cables(or tapered transmission lines when chip input widths do not match ) to match amplifiers whose Input/Output matching are bad.


    1 members found this post helpful.

  12. #12
    Advanced Member level 5
    Points: 14,423, Level: 28
    pancho_hideboo's Avatar
    Join Date
    Oct 2006
    Location
    Real Homeless
    Posts
    2,169
    Helped
    594 / 594
    Points
    14,423
    Level
    28

    Re: S11 is larger than 0dB




--[[ ]]--