Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Test Fiber cable with smart phone's torch

Status
Not open for further replies.

dann11

Full Member level 3
Joined
Oct 22, 2015
Messages
166
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,742
Hi! I just want to ask, is it still possible to use smart phone's torch light to test a fiber cable with around 500m distance?
 

Hi,

What do you want to test?

Bandwidth? Rise/fall time? Loss? most probably not.

So the only thing you can test: if you can see light at the other end of the cable.
I´d say it depends: If the loss for visible light is low enough you should see something.
But no one knows which diameter, which mode, for which light bandwidth your cable is....

Klaus
 

I just want to check the end-to-end connection. The fiber is single mode with wavelength of 1310nm.
 

You should be able to see the speck of light at the end - but you need to touch the end of the fiber to the phone.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top