+ Post New Thread
Results 1 to 5 of 5

4th December 2018, 03:37 #1
 Join Date
 Sep 2013
 Posts
 18
 Helped
 0 / 0
 Points
 1,054
 Level
 7
power (W) sum of series & parallel circuit.
Last edited by myjae; 4th December 2018 at 03:43.

Advertisment

4th December 2018, 03:45 #2
 Join Date
 Nov 2012
 Posts
 2,861
 Helped
 676 / 676
 Points
 15,537
 Level
 30
Re: power (W) sum of series & parallel circuit.
Yes, power will be additive.
In both series and parallel combinations, you can add the individual power dissipated by individual components to get the total.

Advertisment

4th December 2018, 03:50 #3
 Join Date
 Sep 2013
 Posts
 18
 Helped
 0 / 0
 Points
 1,054
 Level
 7
Re: power (W) sum of series & parallel circuit.
how to calculate mathmedical formula of power sum?

Advertisment

4th December 2018, 04:13 #4
 Join Date
 Aug 2016
 Posts
 255
 Helped
 41 / 41
 Points
 1,648
 Level
 9
Re: power (W) sum of series & parallel circuit.
You have calculated correctly the power dissipated by each resistor in each case.
However, in engineering you have to leave a safety margin when selecting components. Ideally, the higher the safety margin the better, but practically, there is a cost (and size) implication so you have to strike a balance between the two. After calculating the power dissipation (say P) like you did, different folks use different safety factors to obtain the minimum power rating for the resistor. There are factors like 1.25*P; 1.3333*P; 1.5*P and so on. Here, 1.25*P gives the least safety margin and 1.5*P gives the most. I go for 1.5*P.
Akanimo.

4th December 2018, 07:28 #5
Awards:
 Join Date
 Apr 2014
 Posts
 14,484
 Helped
 3296 / 3296
 Points
 70,834
 Level
 64
Re: power (W) sum of series & parallel circuit.
Hi,
i will design series circuit with resist.
what is the allowable power of each of resist.
KlausPlease don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.
+ Post New Thread
Please login