+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Full Member level 1
    Points: 2,388, Level: 11
    Achievements:
    7 years registered

    Join Date
    Jun 2008
    Posts
    97
    Helped
    1 / 1
    Points
    2,388
    Level
    11

    Convert SC16IS752 module to handle higher baud rates

    I bought several of these SC16IS752 DUART modules on Aliexpress to use with my C8051F340 projects but was dissappointed to find the crystal they came with could not handle baud rates above ~57600. So ... I bought some 29.4912 MHZ crystals swapped out the crystals.

    I first used solder wick to get out most of the solder, then gently rocked the large crystal side to side until it came loose. I tested it all the way up to 460800 baud ... works fine !

    Click image for larger version. 

Name:	ad-pic.jpg 
Views:	1 
Size:	30.6 KB 
ID:	150293

    •   AltAdvertisment

        
       

  2. #2
    Super Moderator
    Points: 67,706, Level: 63
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    13,844
    Helped
    3158 / 3158
    Points
    67,706
    Level
    63

    Re: Convert SC16IS752 module to handle higher baud rates

    Hi,

    And what's your question, now?

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



    •   AltAdvertisment

        
       

  3. #3
    Full Member level 1
    Points: 2,388, Level: 11
    Achievements:
    7 years registered

    Join Date
    Jun 2008
    Posts
    97
    Helped
    1 / 1
    Points
    2,388
    Level
    11

    Re: Convert SC16IS752 module to handle higher baud rates

    Oh ... didn't copy other half of message :(

    I am really looking for readily available I2C/SPI - to - 4 UART bridges ... or small 8051/STM8/32 micro development boards with at least 4 hard ware UARTs. My searches haven't turned up anything. Does anyone know of any ?

    Thanks in advance.



    •   AltAdvertisment

        
       

  4. #4
    Super Moderator
    Points: 67,706, Level: 63
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    13,844
    Helped
    3158 / 3158
    Points
    67,706
    Level
    63

    Re: Convert SC16IS752 module to handle higher baud rates

    Hi,

    What I did:
    * opened farnell.com in the browser
    * did a search for UART
    * selected the interfaces chips
    * selected "4 UARTs"
    And found MAX14830.....and many others within one minute

    What did you so far?

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



  5. #5
    Full Member level 1
    Points: 2,388, Level: 11
    Achievements:
    7 years registered

    Join Date
    Jun 2008
    Posts
    97
    Helped
    1 / 1
    Points
    2,388
    Level
    11

    Re: Convert SC16IS752 module to handle higher baud rates

    Ohhhh Bless you sir, bless you.

    And the MAIN POINT .... development boards ????



--[[ ]]--