DimitrisTyrovolas
Newbie level 1
Hello,
I ve made a cylinder who has a material called <<Body>> which material is editted by me.The characteristics of the material are εr=52.7(permittivity) and σ=2.72 siemens/m(conductivity).The cylinder is lied horizontally and above the cylinder,i ve created a patch antenna which works at ISM BAND(especially 2.41 GHz).After the simulation is completed, i want to calculate the SAR of the cylinder(it works like a human hand for me) but it is 0.On the other hand i can see the SAR of the antenna which works fine.
My source is a lumped port,but i tried for a current source too(I use a small current <<10 mA>> because i want to use Bluetooth)
Why SAR is 0?
Also HFSS says
lot 'Average_SAR3' becomes invalid due to no available solution.
Please help!
I ve made a cylinder who has a material called <<Body>> which material is editted by me.The characteristics of the material are εr=52.7(permittivity) and σ=2.72 siemens/m(conductivity).The cylinder is lied horizontally and above the cylinder,i ve created a patch antenna which works at ISM BAND(especially 2.41 GHz).After the simulation is completed, i want to calculate the SAR of the cylinder(it works like a human hand for me) but it is 0.On the other hand i can see the SAR of the antenna which works fine.
My source is a lumped port,but i tried for a current source too(I use a small current <<10 mA>> because i want to use Bluetooth)
Why SAR is 0?
Also HFSS says
lot 'Average_SAR3' becomes invalid due to no available solution.Please help!
