shruthi08
Newbie level 5
Hello Forum,
I am working on the design of a Gilbert Cell Mixer with reference to (https://pdfs.semanticscholar.org/74fb/3b545a3bbb080ae460218e861d2bbd34dd1d.pdf)
My Goals are:
1. Vdd should be 1V
2. Total current Idd approximately equal to 500uA-1mA
3. Voltage Conversion gain >= 6dB
Width of all nmos = 3µm
Width of all pmos = 8µm
R1 and R2 = 8KΩ
L1 and L2 = 2nH
I am getting a VGC of -26dB at plo of 2dB.
My first query to start my journey with edaboard is
Do we take the modulus of the gain value or -26dB is not a valid value. Please correct me if I am wrong in any of my assumptions.
I am working on the design of a Gilbert Cell Mixer with reference to (https://pdfs.semanticscholar.org/74fb/3b545a3bbb080ae460218e861d2bbd34dd1d.pdf)
My Goals are:
1. Vdd should be 1V
2. Total current Idd approximately equal to 500uA-1mA
3. Voltage Conversion gain >= 6dB
Width of all nmos = 3µm
Width of all pmos = 8µm
R1 and R2 = 8KΩ
L1 and L2 = 2nH
I am getting a VGC of -26dB at plo of 2dB.
My first query to start my journey with edaboard is
Do we take the modulus of the gain value or -26dB is not a valid value. Please correct me if I am wrong in any of my assumptions.
