+ Post New Thread
Results 1 to 4 of 4

20th August 2018, 16:51 #1
 Join Date
 Mar 2013
 Location
 Poland
 Posts
 28
 Helped
 0 / 0
 Points
 1,125
 Level
 7
Solving electrical circuit  loop method.
Hello everyone,
I've been trying to solve this circuit :
Just to be clear the single circle with arrow means voltage source,
 double circle with arrow means current source (I wrote it here because i know that there are some differencies in some countries etc.)
I have to use loop method. My question is : Is it good way, to connect in parralel to current source I, another current source in opposite polarisation with the same value, so it means that I will "get rid off" lonely current source to use loop method ? Of course , I add the same current source to resistors Z1 and Z5 to not damage the circuit.
I upload some calculations about this circuit, is it correct ?
Best regards
Peter

Advertisment

21st August 2018, 03:05 #2
 Join Date
 Apr 2011
 Location
 Minneapolis, Minnesota, USA
 Posts
 12,335
 Helped
 2445 / 2445
 Points
 50,067
 Level
 54
Re: Solving electrical circuit  loop method.
I was thinking that, to conceptualize it visually it might help if you reverse the positions of Z2 and the voltage source. Then the two power supplies are seen as a stack in series.
The resistor loads are various series and parallel networks. By redrawing the circuit it might be easier to grasp how they interact. It might reveal a path to simplifying things.
This is not meant to detract from your own approach, of course.

Advertisment

23rd August 2018, 04:50 #3
 Join Date
 Mar 2012
 Posts
 359
 Helped
 70 / 70
 Points
 2,831
 Level
 12
Re: Solving electrical circuit  loop method.
This is a straight forward calculation, why make it complicated? You have three loops in this circuit. The current in the southwest loop is already given as "J". That leaves two loops with unknown currents. Solving the unknowns i1 and i2 for the north loop and southeast loop respectively gives the solution as shown below.
RatchHopelessly Pedantic
1 members found this post helpful.

Advertisment

23rd August 2018, 18:25 #4
 Join Date
 Mar 2013
 Location
 Poland
 Posts
 28
 Helped
 0 / 0
 Points
 1,125
 Level
 7
+ Post New Thread
Please login