Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Is it possible to insert a LOGO on a custom hierarchy in Vivado Block Design?

Status
Not open for further replies.
M

msdarvishi

Full Member level 4
Joined
Jul 30, 2013
Messages
230
Helped
1
Reputation
2
Reaction score
1
Trophy points
18
Activity points
2,349
Dear all,


I made a design schematic in Vivado Block Design and I merged all my modules into a hierarchy. Is it possible to insert a desired logo on the hierarchy?

I know that this is possible to do if I make an IP from my hierarchy, but I DO NOT want to do this because when I create an IP from the hierarchy, I won't have access to the hierarchy sub-modules and the IP will appear as a black-box with I/Os.


Kind replies and helps are in advance appreciated!


Bests,
 

Just a quick thought.
You could make a dummy IP with your logo and place it on your every design.
That dummy IP could have one input and one output looped back and doing nothing at all - but your logo would be visible on Block Design!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top