+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Junior Member level 3
    Points: 406, Level: 4

    Join Date
    May 2017
    Posts
    26
    Helped
    0 / 0
    Points
    406
    Level
    4

    Position control with load using RC servo

    Hello guys, I'm currently playing RC servo in position control. But I'm confused, did load affecting position control? Let's said I have a solar panel attached to my servo, when the servo rotate to the desired angle, will solar panel affect the positioning control direct or indirectly?

    •   AltAdvertisment

        
       

  2. #2
    Advanced Member level 5
    Points: 22,107, Level: 36
    barry's Avatar
    Join Date
    Mar 2005
    Location
    California, USA
    Posts
    4,230
    Helped
    936 / 936
    Points
    22,107
    Level
    36

    Re: Position control with load using RC servo

    Unless you've grossly overloaded the motor it should eventually get to right position. It's a closed loop system so the servo is going to do everything it can to get to the desired position


    1 members found this post helpful.

    •   AltAdvertisment

        
       

  3. #3
    Junior Member level 3
    Points: 406, Level: 4

    Join Date
    May 2017
    Posts
    26
    Helped
    0 / 0
    Points
    406
    Level
    4

    Re: Position control with load using RC servo

    I see, thanks. Guess it won't be overload, thanks for your help.



    •   AltAdvertisment

        
       

  4. #4
    Newbie level 1
    Points: 29, Level: 1

    Join Date
    Aug 2018
    Location
    www.kingsunpcb.com
    Posts
    1
    Helped
    0 / 0
    Points
    29
    Level
    1

    Re: Position control with load using RC servo

    yes I see, thanks. Guess it won't be overload, thanks for your help.:微笑:



--[[ ]]--