Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Parallel Pattern Simulation

Status
Not open for further replies.
S

sandy2811

Junior Member level 3
Joined
Jul 20, 2012
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,450
Hi,
Can anybody explain the procedure of 1 parallel 5 serial pattern simulation. Is that any example or link or any whitepaper based on this serial and parallel simulation.
 

This question is related to VCS simulator.
 

Ncsim and irun has switches tmax_parallel = n : gives n no. of shifts during parallel simulation.
tmax_serial = n : gives n serial pattern and rest of patterns parallel if u r running serial testbench.
tmax_n_pattern =n : gives n pattern serial or parallel based on simulation is serial or parallel.
I'm not sure .Try it out.
Hope you talking about tetramax atpg patterns.
 

Adarsh24 said:
Ncsim and irun has switches tmax_parallel = n : gives n no. of shifts during parallel simulation.
tmax_serial = n : gives n serial pattern and rest of patterns parallel if u r running serial testbench.
tmax_n_pattern =n : gives n pattern serial or parallel based on simulation is serial or parallel.
I'm not sure .Try it out.
Hope you talking about tetramax atpg patterns.
Click to expand...

Sorry,these are not switches. These are macros in testbench you write out using tetramax.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top