Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What Pout of LNA at out of band frequency spot

Status
Not open for further replies.

rajan_pec

Junior Member level 2
Joined
Oct 22, 2007
Messages
21
Helped
11
Reputation
22
Reaction score
10
Trophy points
1,283
Location
India
Activity points
1,450
Hi all,
I have simulated Qorvo TQL9044 LNA (internally matched for 1.5GHz to 4GHz band).
At 5.2GHz (out Band), simulation responses are :
S11 (IRL) is -0.47dB; S22(ORL) is -5.8dB and S21(gain) is -4.96dB.
Question: If I feed -20dBm as input power to this LNA at 5.2GHz then what will be the output power? Will it be -24.96dBm (-20dBm -4.96dB) or nil output as IRL is nearly 0dB.
Pl reply

Regards
 

The S21 number already includes the mismatch loss, so you will see -25dBm output signal.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top