Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Selecting CTS topology in ICC

Status
Not open for further replies.

Vamsi Srikanth S

Newbie level 3
Joined
Dec 3, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
18
Hi,

Is there any way to select a specific topology for CTS, like following:
1) Conventional
2) H Tree
3) X Tree

Thanks.
 

I am not a heavy Synopsys user, but what I can tell you is that the industry is moving away from these clock tree structures. The balancing that you achieve with an H-tree is really unnecessary.
 

I am not a heavy Synopsys user, but what I can tell you is that the industry is moving away from these clock tree structures. The balancing that you achieve with an H-tree is really unnecessary.

I agree, but I just want to see how these structures impact timing latency etc
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top