Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cadence Stability Analysis

Status
Not open for further replies.
N

nile_king

Member level 1
Joined
Mar 8, 2005
Messages
33
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
Egypt
Activity points
1,577
cadence stability analysis

Hi

Dear all

I wanna know how to use the stability analysis in cadence tools ?
i'm designing bandgap cts and wanna check the stability and don't know how??
i put an AC source in the loop that i wanna check its stability and run the STB analysis and the probe to this source but obtain no results
is there any problem in what i did??

thanks in advance
 

stability analysis cadence

U may use the cadence documents, its useful :)
 
stb analysis cadence

eng_Semi said:
U may use the cadence documents, its useful :)
Click to expand...

what i wrote is exactly what in the documents
 

stability cadence

Insert a iprobe from analoglib into the loop and select that as your probe in the stability analysis. That should solve the problem. If not clear let me know
 
cadence stability

You will see the results if you go to results->direct plot->main form and choose stability analysis
 

    N

    nile_king

    Points: 2
    Helpful Answer Positive Rating
check stability cadence

Thank you for ur help
it works now
BUT i see the phase margin and gain margin in negative is that mean wrong in the design ??
 

stability analysis stb

Hi

Is it must to open the loopin this analysis STB or the source inside the loop find the open loop gain and its phase margin

Thx
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top