Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Generating an independent open collector output from the same output collector output

Status
Not open for further replies.
F

flote21

Advanced Member level 1
Joined
Jan 22, 2014
Messages
411
Helped
1
Reputation
2
Reaction score
3
Trophy points
1,298
Activity points
5,595
Hello guys!

I need to drive one output collector output to two different inputs and I am wondering about how to do it avoiding any interference between them...

Any idea?

Thanks in advance.
 

1. Use diodes for isolation, if low level is still sufficient
2. Use pull-up followed by two separate O.C. buffers
 
Hi!!

It looks that the solution with the diodes works fine ;-)

SolutionWithDiodes.jpg

Thansk!


FvM said:
1. Use diodes for isolation, if low level is still sufficient
2. Use pull-up followed by two separate O.C. buffers
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top