+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Newbie level 3
    Points: 42, Level: 1

    Join Date
    Feb 2018
    Posts
    4
    Helped
    0 / 0
    Points
    42
    Level
    1

    Plug & Cable for 2 twisted TX/RX and 24V (<1A) supply >=IP56

    Hi,

    I am right now searching for a Plug & Cable to transmit on two wires UART/TTL with a very low rate (512bit/s) and supply with 24V (<1A) on another two wires.
    Simply using RJ-45 etc. as a plug wouldn't be possible as it should be in total quite durable and at least fulfil IP56.
    As there could be E-motors/pumps and other electronics in the surrounding I would search for one with 2 twisted pairs, which are also shielded separately.

    Could somebody recommend something (especially regarding the plugs)?

    Thanks already in advance for helpful comments/thoughts. :)

    •   AltAdvertisment

        
       

  2. #2
    Super Moderator
    Points: 29,243, Level: 41
    ads-ee's Avatar
    Join Date
    Sep 2013
    Location
    USA
    Posts
    6,754
    Helped
    1606 / 1606
    Points
    29,243
    Level
    41

    Re: Plug & Cable for 2 twisted TX/RX and 24V (<1A) supply >=IP56

    Don't use TTL for a differential twisted pair use a normal differential standard. For a UART serial RS422 is normally used in noisy environments.



--[[ ]]--