+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Newbie level 6
    Points: 169, Level: 2

    Join Date
    Oct 2017
    Posts
    11
    Helped
    0 / 0
    Points
    169
    Level
    2

    UCF file conversion from Spartan-6 to Virtex-5 XC5VLX20T ff323

    Hi,

    I have the following UCF file for Spartan-6 FPGA. Currently I am using Virtex-5 XC5VLX20T ff323 to implement my design. How can I convert the same file according to Virtex 5. If someone has already, please share.

    Regards,
    Qazi
    mc8051_fpga_top.txt

    •   Alt9th November 2017, 15:23

      advertising

        
       

  2. #2
    Super Moderator
    Points: 29,071, Level: 41
    ads-ee's Avatar
    Join Date
    Sep 2013
    Location
    USA
    Posts
    6,686
    Helped
    1604 / 1604
    Points
    29,071
    Level
    41

    Re: UCF file conversion from Spartan-6 to Virtex-5 XC5VLX20T ff323

    A Spartan-6 is a different family, different package, different pinout part. There is no "magic" conversion between the devices. You pick new pins on the Virtex-5 that have the same functionality as the ones that were used on the Spartan-6. e.g. put the clk pin on a dedicated MRCC (multi-region clock capable) pin, use the pin that has a reset cicruit on the board for rst, etc.


    1 members found this post helpful.

--[[ ]]--