Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Porting xenomai rtos to arm cortex m3

Status
Not open for further replies.

sai_kumar

Newbie level 1
Joined
Sep 21, 2017
Messages
0
Helped
0
Reputation
0
Reaction score
0
Trophy points
0
Activity points
19
Hi friends,


I am doing a project on Porting XENOMAI RTOS to cortex m3 architecture(LPC1768board), but i am new to this subject and i do not know how to start .

if anybody did a project or currently doing similar project please guide me how to start .
Thank you in advance....
 

According to the XENOMAI RTOS webpage, the intention is to give to real time capabilities to the Linux Kernel.

If you want something similar to Linux but for your board give a try to NuttX

http://nuttx.org/
 

I do not believe an ARM Cortex-M3 device like the LPC1768 has the resources to support a port of the Linux 3.0 kernel, which is required for Xenomai RTOS.

For a list of the supported hardware:

Supported Hardware

BigDog
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top