+ Post New Thread
Results 1 to 16 of 16

19th July 2017, 13:28 #1
 Join Date
 Jul 2017
 Posts
 59
 Helped
 1 / 1
 Points
 417
 Level
 4
VHDL Register transferring.
hi,
please anyone tell me
how to transfer the bits of one register to another register in vhdl?

19th July 2017, 14:10 #2
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 42,684
 Helped
 13007 / 13007
 Points
 245,688
 Level
 100
Re: VHDL Register transferring.
Code VHDL  [expand] 1
reg2 <= reg1;

Advertisment

19th July 2017, 14:34 #3
 Join Date
 Jul 2017
 Posts
 59
 Helped
 1 / 1
 Points
 417
 Level
 4
Re: VHDL Register transferring.
but i want to transfer the first bit of reg1 to first bit of reg2..

19th July 2017, 14:41 #4
 Join Date
 Jun 2010
 Posts
 6,614
 Helped
 1927 / 1927
 Points
 36,169
 Level
 46
Re: VHDL Register transferring.
Code VHDL  [expand] 1
reg2(0) <= reg1(0);  assuming reg1/2 are arrays where 0th element is first bit

19th July 2017, 15:00 #5
 Join Date
 Jul 2017
 Posts
 59
 Helped
 1 / 1
 Points
 417
 Level
 4
Re: VHDL Register transferring.
Code VHDL  [expand] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
library ieee; use ieee.std_logic_1164.all; entity test3 is port(clk: in std_logic; ifc_a: out std_logic_vector(1 downto 0)); end test3; architecture modu of test3 is signal ifc_dout: std_logic_vector(1 downto 0); begin process(clk) then begin if(rising_edge(clk)) then ifc_a(0)<=ifc_dout(0); ifc_a(1)<=ifc_dout(1); end if; end process; end modu;

19th July 2017, 15:16 #6
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 42,684
 Helped
 13007 / 13007
 Points
 245,688
 Level
 100
Re: VHDL Register transferring.
how to transfer the bits of one register to another register in vhdl?but i want to transfer the first bit of reg1 to first bit of reg2..
Code:ifc_a(0)<=ifc_dout(0); ifc_a(1)<=ifc_dout(1);
Code:ifc_a<=ifc_dout;

Advertisment

1st August 2017, 11:07 #7
 Join Date
 Jul 2017
 Posts
 59
 Helped
 1 / 1
 Points
 417
 Level
 4
Re: VHDL Register transferring.
reg1(2:3) <= reg2(3:4);
is this valid in vhdl?

Advertisment

1st August 2017, 11:12 #8
 Join Date
 Jun 2010
 Posts
 6,614
 Helped
 1927 / 1927
 Points
 36,169
 Level
 46

1st August 2017, 11:26 #9
 Join Date
 Jul 2017
 Posts
 59
 Helped
 1 / 1
 Points
 417
 Level
 4

1st August 2017, 11:53 #10
 Join Date
 Jun 2010
 Posts
 6,614
 Helped
 1927 / 1927
 Points
 36,169
 Level
 46
Re: VHDL Register transferring.
by writing valid VHDL:
reg1(2 to 3) <= reg2(3 to 4);

1st August 2017, 12:12 #11
 Join Date
 Jul 2017
 Posts
 59
 Helped
 1 / 1
 Points
 417
 Level
 4

1st August 2017, 12:25 #12
 Join Date
 Jun 2010
 Posts
 6,614
 Helped
 1927 / 1927
 Points
 36,169
 Level
 46
Re: VHDL Register transferring.
then you want downto instead.
Please work your way through a VHDL tutorial..

Advertisment

1st August 2017, 15:30 #13
 Join Date
 Apr 2016
 Posts
 1,342
 Helped
 232 / 232
 Points
 6,329
 Level
 18

1st August 2017, 16:26 #14
 Join Date
 Sep 2013
 Location
 USA
 Posts
 6,721
 Helped
 1604 / 1604
 Points
 29,150
 Level
 41
Re: VHDL Register transferring.
Besides that, switching constantly between Verilog and VHDL isn't going to help you learn either language. Pick one and learn just that one language. Once you are familiar (I don't mean you can recognize the language) with designing in that language and are comfortable with using it, then and only then, should you start studying the other language.

2nd August 2017, 05:15 #15
 Join Date
 Jul 2017
 Posts
 59
 Helped
 1 / 1
 Points
 417
 Level
 4

2nd August 2017, 06:15 #16
 Join Date
 Feb 2015
 Posts
 887
 Helped
 256 / 256
 Points
 5,356
 Level
 17
Re: VHDL Register transferring.
You normally don't need to convert verilog into vhdl. many tools support both as long as a common subset is used at the interface between the two.
in both languages vectors have a value and a defined way to index the bits.
Code:signal a : std_logic_vector(0 to 3); signal b : std_logic_vector(1 to 4); signal c : std_logic_vector(3 downto 0); signal d : std_logic_vector(7 downto 4); a <= "X10Z";  a(0) = 'X', a(1) = '1'; a(2) = '0', a(3) = 'Z';  a(3) is the leftmost bit b <= a;  b(0) is an error. b(1) = 'X', b(2) = '1', b(3) = '0', b(4) = 'Z'; c <= a;  c(0) = 'Z', c(1) = '0', c(2) = '1', c(3) = 'X';  c(0) is the leftmost bit d <= a;  d(0), d(1), d(2), d(3) are not valid. d(4) = 'Z', d(5) = '0', d(6) = '1', d(7) = 'X'
The literal "X10Z" has a default indexing scheme of "0 to 3", although this fact rarely comes up.
+ Post New Thread
Please login