Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help to Replace VFD with LCD Dispaly.

Status
Not open for further replies.
M

Maroof100

Newbie level 2
Joined
Dec 7, 2016
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
15
Hi,
I have a cu4002scpb-t63a VFD installed on a machine which is now broken.:sad:
I want to replace this VFD with HD44780 LCD but the problem is this VFD uses i80 Parallel interface (D7-D0,/WR,/CS,BUSY) and HD44780 uses M68 intererface(D7-D0,RS,R/W,E).
Is there anyway to replace this VFD with LCD??
 

replacing VFD with LCD require some code change in the application.
 

VFD is installed on a Power Loom so changing code is not an option. Is it possible to take i8080 protocol input and convert it to M68 by using micro controller or any IC??
 

for conversion of protocol , the IC or controller based option may work.
But what about the data formats requirments and substitution of registers?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top