Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] best solution type for filter design in HFSS

Status
Not open for further replies.
S

srmishra3487

Newbie level 3
Joined
Nov 24, 2016
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
28
filter design in HFSS, which solution type will be best fitted Driven modal or driven terminal and also which excitation should it follow

please anybody can?
 

For Filter design Driven mode is good specially if it is waveguide based filter. As in S-matrix solutions will be expressed in terms of the incident and reflected powers of waveguide modes.

In case of microstrip based structure you can choose Driven Terminal, as S-matrix solutions of multi-conductor transmission line ports will be expressed in terms of terminal voltages and currents.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top