Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

design compiler symbol library

Status
Not open for further replies.

hamidmoallemi

Full Member level 2
Joined
Jan 28, 2010
Messages
148
Helped
41
Reputation
78
Reaction score
39
Trophy points
1,308
Activity points
2,135
Hi
I am using Synopsys design compiler as synthesize tool , I have PDK from a vendor that doesn't have symbol library then I can't do synthesize in design vision.

is this library needed if I don't use gui and don't need to se schematics ?
and is there any way to synthesize without this library ?


do you have any suggestion for this

thanks in advance
Hamid
 

Hi,

The symbol library (*.sdb) can not affect to the synthesis of Design Compiler tool. Can you show the TCL script to synthesize your design?
Maybe, you setup the values of link_library or search_path variables incorrect!!!

Regards
 

thank you for the response,
I checked setup parameters there is no problem with that
maybe this is because I use GUI , in this mode *.sdb is mandatory

I should check dc_shell
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top